Older F Series .net

The site for your Pre 97 F-Series needs!
It is currently Sat Dec 16, 2017 1:10 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: 302 refresh and mini-build
PostPosted: Mon Aug 27, 2012 1:21 am 
Offline
Coal Cracker

Joined: Tue May 17, 2005 9:16 pm
Posts: 2978
As ya have seen in general, we picked up a low milage 302 from a 1996 F150 for Sarahs Bronco last weekend. Complete engine from intake to oil pan with accessories, engine harness, new alt, and computer (along with some odds n ends) for $400.

So far, since its up her house in the garage (no room at the inn here) i managed to remove the accessories/brackets, hoses and minor external pieces. Plans are a regasket of the engine with new rear main seal and timing cover seal, new tensioner/idle pulley, water pump/t-stat, and whatever else needs attention.

So far we have some parts gathered:
Two new engine mounts
New Ford waterpump/bolt kits and t-stat (thanks Jakey)
Saginaw PS pump and van bracket (thanks Jakey)
Like new starter i got for free from my friend
Swap plugs/wires/cap/rotor from old engine
Swap accessories/brackets from old engine

Along with what i previously mentioned, i was thinking about replacing the oil pump since the oil pan will be off. What about pullin the heads? Or should i leave them be? What about yankin just the intakes and regasketing them? Was thinkin about a cam swap, but not sure if it'll be worth it on something that doesnt get driven much or used daily. Same with some shorty headers, would they be worth it?

Hopefully this week i can get the engine harness off to degrease it, and get the valve covers and oil pan off to clean em up n paint em...oil pan looks iffy to me...hope i can clean it up n hit it with some POR-15.

_________________
- 1993 F-150 XLT 4x4 300/E4OD/D44 SAS
- 2006 F-150 FX4 4x4 5.4/Auto/ECSB
- 1988 F-350 Custom 4x4 7.3IDI NA/ZF5
- 1966 Mercury Comet 202 390/C6/9"
- 1995 F-150 XLT 4x4 300/E4OD
- 1966 Fairlane GT 390/4SP/9"
- 2003 Exploder Sport 4x4/5R55E
- 2004 Ranger Edge 4x4/5R55E
- 1996 Bronco XLT 4x4 302/E4OD


Top
 Profile  
 
 Post subject: Re: 302 refresh and mini-build
PostPosted: Wed Oct 03, 2012 3:59 pm 
Offline
Lariat Member
User avatar

Joined: Tue May 17, 2005 10:54 pm
Posts: 1998
Location: Texas, Where Else?
pulling the intakes and heads isn't a bad idea. stock gaskets are cheap, and it'll give you piece of mind, that nothing is going wrong in there. maybe some new OEM lifters for fun.


I wouldn't mess with the cam, as to get the most out of any cam other than stock, you'll want to play with tuning. just leave stock cam since you're not REALLY looking for power.

deck the heads a little bit is an easy power upgrade though. give it a little bump in compression.

headers wouldn't hurt anything. Long tubes being ideal, but shorties are easier. and like I said, you're not REALLY looking for power.

_________________
1993 F-150 Lightning - Street/Strip Toy/My Baby
1996 F-350 - Real Truck
2004 F-150 Lightning - Street Toy
2003 F-150 Harley-Davidson - Cruiser/Highway Beast/Panty Dropper
2005 F-350 - Big Bad Tow Rig
2012 F-150 Raptor - Daily Driver


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group  
Design By Poker Bandits